Dacor EF24RBCSS Beverage Dispenser User Manual


 
4
Loading the Wine Racks
All of the wine racks on your wine cooler or beverage center slide
out for easy access except for the bottom shelf.
Each • of the slide out racks can hold up to nine 750 mL
Bordeaux bottles.
The bottom shelf can hold up to 11 Bordeaux bottles.•
For maximum capacity, reverse the position of every other •
bottle as shown.
Bottle Placement
Labeling Your Wines
The front of e• ach slide out rack has a slot for attaching wine
labels. Labeling the front of the rack allows you to find the bottle
of wine you are looking for without having to pull the racks out
and look at the bottle labels.
You can obtain additional labels from your Dacor dealer or • parts
distributor.
Slot for Labels
Getting to Know the Control Panel
Temperature setting buttons
Child-resistant lock indicator
Temperature display
ON/OFF button
Interior LIGHT on/off button
ALARM on/off button
Turning the Power ON and OFF
Clean your appliance before turning it on for the •
first time. See the Care and Cleaning section.
Connect the power cord to the electrical outlet. •
The unit will come on.
The alarm will sound and the temperature •
display will flash because the beverage
compartment is warm when you first turn it on (see the Alarm
section for details). Push the ALARM button to turn the
alarm off while the compartment is cooling down to operating
temperature. The temperature display will continue to flash until
the interior has cooled.
To turn the unit off, push and hold the • ON/OFF button for about
three seconds. The display will turn off to indicate that the
appliance is off.
To turn it on, push the • ON/OFF button until the display lights up.
Setting the Temperature
Push the • UP or DOWN button repeatedly to raise or lower the
temperature. You can change the settings in increments of 1°F
(or 1°C). The temperature setting will flash on the display while
you change it.
After • five seconds the display will stop flashing and the actual
temperature of the compartment will be displayed.
NOTE: Depending on the amount of temperature change, it
may take a few minutes to a few hours for the compartment
temperature to reach the newly adjusted temperature level.
Operating Your Appliance