Filter
Top Products
STEP 1: Make sure you have access to the back of the range so that you
can tighten the screws into place.
STEP 2: Disconnect power to the range at the junction or fuse box.
STEP 3: Turn off the gas at the gas supply valve.
STEP 4: Remove the screws on the front and back of the existing trim.
Slide the trim off the unit.
DANGER:
Electric shock and explosion hazard! Before installation,
disconnect power at the circuit breaker or fuse box and turn
off the gas supply valve.
Instructions:
Backguard Kits
PN AERB36/48 -D3 -D9
INSTALLATION
INSTRUCTIONS
RANGE MODELS: ER36D and ER48D
Part No. 101491 Rev. D-1
WARNING: Do not disassemble the range until it has cooled.
Existing Trim Removal
Style and size varies with kit
Preliminary
For Review Only