Filter
Top Products
9
Warming Drawer Control Panel Layout
Installation Instructions
Verify Warming Drawer
Operation
1. Connect power plug to the electrical outlet.
2. Open the drawer and press the ON/OFF key on the
control panel.
3. Press the PROOF, LOW, MED and HIGH keys each
in turn. When you press each key, the indicator directly
above it should light. Leave the control panel set to
HIGH.
4. Press the SELECT key. The 1 HOUR indicator should
light. Press and release the SELECT key three (3)
more times. Each time you press the SELECT key, the
2 HOUR, 3 HOUR and 4 HOUR indicator lights should
come on. All lights should be on after pressing the
SELECT key the third time.
5. Press the "∞" key. The indicator light above it
should come on and the 1, 2 , 3 and 4 HOUR
lights should go out.
6. The warming drawer should begin to heat.
You should begin to feel the inside of the
drawer begin to heat within five (5) to ten (10)
minutes.
7. When you have determined that the heating
element is working, press the ON/OFF key.
If the warming drawer does not operate properly, follow
these troubleshooting steps:
• Verify that the circuit breaker for the electrical outlet
is on and not tripped. Make sure the power plug is
connected.
• Repeat the above tests.
• If the appliance still does not work, contact Dacor
Distinctive Service at (877) 337-3226. Do not attempt
to repair the appliance yourself. Be sure to have the
model and serial numbers available when you call. See
page 1 for model/serial number location.
Dacor is not responsible for the cost of correcting problems
resulting from a faulty installation.
Installation Checklist
WARNING
• To ensure a safe and proper installation, the following
checklist should be completed by the installer to
ensure that no part of the installation has been
overlooked.
• Proper installation is the responsibility of the
homeowner. The importance of proper installation of
your warming drawer cannot be overemphasized.
□ Support platform has been installed according to the
instructions on page 6.
□ Properly grounded, dedicated, three prong electrical
outlet has been installed for the appliance by a licensed
electrician. See page 6.
□ The chassis has been properly fastened to the support
platform and sides of the cabinet.
See page 7.
□ The drawer has been properly installed. See page
8.
□ Model OWD24 for use as towel warmer: The towel rack
has been installed. See page 8.
□ Proper operation has been verified?
□ The warranty has been activated on-line or the
warranty card filled out completely and mailed?
□ Save these instructions for future reference.