Filter
Top Products
3
Verifying the Package Contents
Use and Care manual•
Mounting screws•
Installation Planning
A qualified technician must complete the installation of this
built-in appliance. Proper installation is your responsibility.
Carefully check the location where the drawer is to be
installed. The drawer should be placed for convenient
access. Make certain that electrical power can be provided
in the selected location.
Plan the installation so that all minimum clearances are
met or exceeded. Dimensions shown provide minimum
clearances, unless otherwise noted. Be certain that proper
clearance is provided for the drawer door when it is in the
open position.
The specified minimum cabinet depth and width must be
provided. The cabinet depth and width must completely
enclose the recessed portion of the drawer.
Cabinet cutout dimensions must be used as indicated. All
contact surfaces between the appliance and the cabinet
must be solid and level. The drawer support platform must
be flush with the bottom edge of the cabinet cutout.
Make certain that you have everything necessary to ensure
a proper installation before proceeding.
Installation Specifications
Warming
Drawer
Model No.
Dimension “A”
Drawer Face
Width
Dimension “B”
Chassis Face
Width
Dimension
“C”
Drawer Face
Height
Dimension
“D”
Chassis
Depth
Dimension “E”
Drawer depth
Dimension
“F”
Chassis
Height
IWD24 22 5/16” (567 mm) 22 1/8” (562 mm)
8 15/16”
(227 mm)
23 3/8”
(594 mm)
23 13/16”
(605 mm)
9” (229 mm)
IWD27 25 5/16” (643 mm) 25 1/8” (638 mm)
IWD30 28 5/16” (719 mm) 28 1/8” (714 mm)
40" (1016 mm)
3 prong
120 Vac power cord
Chassis without
drawer installed
Mounting hole,
9 places
F
Chassis Dimensions
(IWD Series Shown)
C
A
Drawer Face Dimensions
(IWD Series Shown)
Chassis
Drawer open
E
D
B
Overall Dimensions - IWD Series
Top View
See following page for other models