Filter
Top Products
2
3
Cooktop featUres
sealed bUrners
On SGM304 and SGM364 Cooktops, there are a total of four
burners, including one burner rated at a maximum output of
14,000 BTU/HR, one burner rated at a maximum of 12,500 BTU/
HR and two burners rated at a maximum output of 8,500 BTU/HR.
The knobs are grouped in twos. The front two knobs operate the
front two burners, and the rear two knobs control the two rear
burners.
8,500 BTU
14,000 BTU 8,500 BTU
12,500 BTU
SGM304
Top View
On the SGM365 Cooktop, there are a total of five burners,
including one burner rated at a maximum output of 14,000 BTU/
HR, two burners rated at a maximum of 12,500 BTU/HR and two
burners rated at a maximum output of 8,500 BTU/HR. The knobs
are positioned to correspond with the burner layout.
8,500 BTU14,000 BTU
8,500 BTU 12,500 BTU 12,500 BTU
SGM365
Top View
On the SGM466 Cooktop, there are a total of six burners,
including two burners rated at a maximum output of 14,000 BTU/
HR, one burner rated at a maximum of 12,500 BTU/HR and three
burners rated at a maximum output of 8,500 BTU/HR. The knobs
are grouped in threes. The front three knobs operate the front
three burners, and the rear three knobs control the three rear
burners.
8,500 BTU 14,000 BTU14,000 BTU
8,500 BTU12,500 BTU8,500 BTU
SGM466
Top View
On the SGM464GG Cooktop, there are a total of five burners,
including one burner rated at a maximum output of 14,000 BTU/
HR, one burner rated at a maximum of 12,500 BTU/HR, two
burners rated at a maximum output of 8,500 BTU/HR and one
burner rated at a maximum of 9,300 BTU/HR (gas grill burner).
The front two knobs operate the front two burners, and the center
knob controls the gas grill.
8,500 BTU
Gas
Grill
Knob
12,500 BTU
8,500 BTU 14,000 BTU
SGM464GG
Top View
All burners are attached to the cooktop by retaining nuts. Gaskets
around the undersides of the burner bases ensure that the
burners are sealed, thereby preventing any liquid spills from
entering the cooktop chassis. All spills remain on the surface of
the cooktop.
SGM Burner Assembly
Each burner ring features Smart-Flame. When oriented properly
by the burner ring positioning tabs, Smart-Flame prevents direct
flame impingement on the fingers of the porcelain grate. This
reduces temperatures on the grate and improves flame and
performance characteristics, as well as increasing longevity of the
porcelain enamel coating on the grate.
A burner igniter is located on each gas burner base. When a
control knob is rotated more than 90˚ counterclockwise, on the
SGM models, all ignitors will spark simultaneously, but only the selected
burner will ignite. Additionally, due to the Perma-Flame reignition
feature, the ignitors will spark automatically if a flame should blow
out or be severely distorted by a draft or by a cooktop ventilation
system. Burner ignitors must always be kept clean and dry to
function properly. Dirty or wet ignitors will result in constant
sparking, even if there is a flame present.
Smart-Flame Burner Ring Notches
brass bUrner rInGs
sMart-flaMe
bUrner IGnItors & perMa flaMe