4
IMPORTANT
To relieve water pressure from inside the water
inlet hose. Make sure the water line (faucet) is
closed. Press and hold the "red" pressure relief
button on the quick connect assembly, until the
flow of water stops.
WARNING
FAILURE TO RELIEVE WATER PRESSURE
BEFORE DISCONNECTING THE QUICK
CONNECT ASSEMBLY FROM THE FAUCET,
WILL RESULT IN BACK-PRESSURE OVER-
SPRAY. THE TEMPERATURE OF INCOMING
WATER CAN BE VERY HOT AND BACK
PRESSURE OVER-SPRAY COULD CAUSE
SEVERE BURNS AND/OR SCALDING.
CAUTION
DO NOT LET CHILDREN DISCONNECT THE
DISHWASHER. Close supervision of children
is always important around appliances.
IMPORTANT
Once you open the water supply line, (even if it is
closed immediately thereafter) the water inlet
hose will be pressurized.
If for any reason you are unable to affect suitable
repairs yourself call our toll free
CUSTOMER HELP LINE at
"1 800 26 DANBY" for assistance.
Disconnecting your Dishwasher
• Close the hot water supply at the faucet.
• Disconnect the power supply cord.
• Remember to release the water pressure inside
the fill hose. Press and hold the "red" pressure
relief button on the quick connect unit until the flow
of water stops.
• Disconnect the quick connect hose assembly from
the faucet , by pulling down on the (outer) locking
collar. When the dishwasher is not in use,
place/store the hose on the hanger hose bracket
located on the rear wall of the dishwasher cabinet.
Loading your Dishwasher
The dishwasher is designed to receive a standard
"4 piece" plate setting consisting of the
following:
•4 Dinner Plates
•4 Bread & Butter Plates
•4 Fruit Bowls
•4 Cups & Saucers
•4 Dinner Forks
•4 Dinner Knives
•4 Salad Forks
•4 Teaspoons
•2 Serving Spoons
•1 Serving Fork
• NOTE: For ease of loading/unloading large size
dinner plates from the dish rack it may be
necessary to (temporarily) remove the silverware
basket. When loading/unloading is complete,
return the silverware basket to it’s original position.
Preparing your Dishes for Washing
• Scrape off all solid food particles from the dishes.
• Remove excessive quantities of oil or grease.
• Empty any liquids from glasses and cups.
• All dishes should be thoroughly rinsed before
being placed inside the dishwasher.
NOTE: Dishes with dried-on foods are more
difficult to wash and may not come clean in a
normal wash cycle.
NOTE: Hard Water conditions will adversely
effect washability performance of your
dishwasher. Hard Water conditions will also
contribute to “Lime” (white film substance)
deposits and/or “Scaling” on the stainless steel
surface of the dishwasher tub and “Heater
Element” located in the sump underneath the
removable filter screen. To assist in minimizing
these conditions, it is recommended to
periodically operate/rinse the inside of the
dishwasher (empty) using 1 cup of white vinegar.
(at least once a week)