Danby DMW101KSSDD Microwave Oven User Manual


 
INSTALLATION GUIDE
1) Make sure that all packing materials are removed from the inside of the microwave oven.
2) Check the microwave for any damage, such as misaligned or bent door, damaged door seals and sealing
surface, broken or loose door hinges and latches, and dents inside the cavity or on the door. If there is any
damage, do not operate the oven but contact a qualified service personnel.
3) This microwave oven must be placed on a flat, stable surface to hold its weight.
4) Do not place the microwave oven where heat, moisture, or high humidity are generated, or near
combustible materials.
5) For correct operation, the microwave oven must have sufficient air flow. Allow 20 cm of space above the
microwave oven, 10 cm at back and 5 cm at both sides. Do not cover or block any openings on the
appliance. Do not remove the feet on which the microwave oven stands.
6) Do not operate the oven without glass tray, roller support, and shafts in their proper positions.
7) Make sure that the power supply cord is undamaged and does not run under the microwave oven or over
any hot or sharp surfaces.
8) The socket must be readily accessible so that it can be easily unplugged in an emergency.
6