Danby DMW111KSSDD Microwave Oven User Manual


 
SETTING
THE CLOCK
7
1) Press “CLOCK”: “00:00” will display.
2) Press the number keys and enter the current time.
For example, to set 12:10, press “1, 2, 1, 0” in
turn.
3) Press “CLOCK” to finish clock setting. “:” will
flash and the clock will be set.
4) If the numbers input are not within the range of
1:00-12:59, the setting will be invalid until valid
numbers are input.
NOTES:
• In the process of setting the clock, if the
STOP/CLEAR button is pressed or if there is no
operation within 1 minute, the oven will go back to
the former setting automatically.
• If the clock needs to be reset, repeat steps 1-3.
SETTING THE
KITCHEN TIMER
1) Press “KITCHEN TIMER”; LED will display
00:00”, and the first hour figure will flash.
2) Press the number keys and enter the timer time (the
maximum cooking time is 99 minutes and 99
seconds).
3) Press “START/+30SEC.” to confirm the setting.
4) When the timer time has been set, the buzzer will
sound 5 times. If the clock is set, LED will display
the current time.
NOTES:
• The kitchen timer is different from the 12-hour
clock system and is intended only for use when
timing.
• During kitchen timer countdown, no programs can
be set. Press “STOP/CLEAR” twice to cancel the
kitchen timer function.
Your microwave clock is a 12-hour system.
MICROWAVE
COOKING
1) Press “TIME COOK” once, LED will display
00:00”.
2) Press the number keys to input the cooking time;
the maximum cooking time is 99 minutes and 99
seconds.
3) Press “POWER” once, LED will display “PL10”.
The default power is 100%. If you desire a lower
power setting, now is the time to press the number
key corresponding to the power level you desire.
4) Press “START/+30SEC.” to start cooking.
Example: To cook food with 50% microwave power
for 15 minutes:
a) Press “TIME COOK” once. “00:00” will display.
b) Press “1, 5, 0, 0” in turn.
c) Press “POWER” once, then press “5 to select
50% microwave power.
d) Press “START/+30SEC.” to start cooking.
NOTES:
• In the process of cooking, if the “STOP/CLEAR
button is pressed or if there is no operation within 1
minute, the oven will go back to the former setting
automatically.
If “PL0 is selected the oven fan will operating with
no heating power.
• During microwave cooking, “POWER” can be
pressed to change the power level. After pressing
POWER”, the current power will flash for 3
seconds; press the number button corresponding to
the power level you desire. The oven will work with
the selected power for the duration of time set.
USE THESE SINGLE DIGITS TO
REPRESENT POWER LEVELS:
Number % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
OPERATION