Danby DMW799BL Microwave Oven User Manual


 
1
2
4
3
6
8
5
7
1) Door Safety Lock System
2) Oven Window: Screen allows cooking to be
viewed while keeping microwave energy
confined in oven.
3) Turntable Shaft
4) Roller Ring
5) Removable Glass Turntable: Turntable and
support must be in place when using the oven.
The turntable may be removed for cleaning.
6) Control Panel
7) Electronic Display
OPERATION
FEATURES OF
YOUR MICROWAVE
CONTROLS
• Menu Cooking: Popcorn, Baked Potato, Pizza, Beverage, Frozen Dinner,
Reheat
• POWER LEVEL: Used to set the power level.
• TIMER: Independent kitchen timer. Set any time, even while oven is
operating, by touching TIMER, setting desired time, then pressing START.
Touch RESET to cancel.
• COOK: Cook at one power level for a period of time, then automatically
switch to another power level for the remaining cook time.
• COOK BY WEIGHT: Touch button, enter weight of meat accurately,
then press START. After partial cooking, the oven stops, leaving time on
display. Turn meat over at this time, then touch START to continue.
• CLOCK: Touch button once, then touch number pads of the time you
wish to set (ex. touch 2, 3, 0 to set 2:30) then touch CLOCK again to set.
• Number Pad: Set times and weights.
• SPEED DEFROST: Programs lower power levels for even defrosting.
Touch SPEED DEFROST, set desired time, then press START.
• DEFROST BY WEIGHT: Automatic defrosting for large meats. Controls
power level to thaw without excessive outside warming.
• START/STOP: Touch as final step in setting oven. Touch to stop
microwaving while oven is in operation (and re-touch to continue timing left
on the display). Start/Stop does not stop the TIMER.
• RESET: Touch to clear display of any unusedtime after cooking, or to
cancel the TIMER.
6
SETTING
THE CLOCK
A) Setting the clock when the microwave is plugged in:
• When the oven is first plugged into a wall outlet, touch the CLOCK pad once. The display will show
‘ENTER CLOCK TIME’.
• Enter the correct time of day by touching the correct number pads. You must set at least 3 digits (one for
hour(s) and two for minutes). For minutes less than 10, precede the ‘minutes’ digit with a 0. (ex. for 5 minutes
past two, press 0205 for a time of 2:05). The colon will flash between hour and minute digits. If you prefer not
to have the clock displayed, set the clock for 00:00 and the display will only show a colon ( : ). Touch
CLOCK to lock in the time. Colon will stop flashing and clock will begin to keep current time.