Filter
Top Products
TROUBLESHOOTING
8
PROBLEM POSSIBLE CAUSE WHAT TO DO
• No Power
• Cabinet Temperature
too high
• “Clicking” noise
• Condensation on the
cabinet and/or door
• A fuse in your home may be blown,
or the circuit breaker may be tripped.
• Power surge.
• Plug not fully inserted in wall outlet.
• Temperature setting too high.
• Door not shut properly or opened
excessively.
• Recently added large quantity of
warm bottles or cans to the cabinet.
• Normal sound.
• High humidity conditions in the
home.
• Door not shut properly or opened
excessively.
• Replace fuse or reset circuit breaker.
• Unplug appliance, wait a few seconds
and then plug back in.
• Ensure 3-prong plug is fully inserted
into electrical outlet.
• Verify the temperature control setting;
adjust if necessary.
• Ensure the door is fully closed and
gasket is sealing against the cabinet.
Open the door only as needed and for
short periods of time.
• Limit the quantity of large bottles or
cans introduced to the cabinet at the
same time. Attempt to phase in the load
introduction if possible.
• No user intervention is required as this
sound is normal; this audible “clicking”
noise may be heard as the appliance ends
or begins a cooling cycle.
• The condensation will subside once
humidity conditions return to normal.
• Ensure the door is fully closed and
gasket is sealing against the cabinet.
Open the door only as needed and for
short periods of time.