Filter
Top Products
7
Operating Instructions
The Controls of
Your Wine Cooler
IMPORTANT!
In the event of a power fail-
ure, wait 3 to 5 minutes
before restarting.
1. Power on/off switch.
2. Interior lights on/off switch (while the door
stays closed).
3. Run: Indicator light illuminates to signify that
the cooling mode is currently in operation.
4. Upper chamber display: Display screen
shows current cabinet temperature and set
temperature of the upper zone.
5. Lower chamber display: Display screen
shows current cabinet temperature and set
temperature of the lower zone.
6. °C/°F: Adjacent indicator light denotes which
scale of temperature is displayed.
7. ‘Set Upper’ button: Used to set the
temperature in the upper zone (see ‘Setting
the Temperature’ below).
‘Set Lower’ button: Used to set the
temperature in the lower zone (see ‘Setting
the Temperature’ below).
Setting the
Temperature
• To switch the display between
the Fahrenheit (°F) and Celsius
(°C) scale, depress the ‘Set
Upper’ and ‘Set Lower’ control
buttons simultaneously for
approximately five (5) seconds.
• The temperature range can be
set as low as 39°F (4°C) or as
high as 64°F (18°C) to suit your
specific wine storage require-
ments. Each depression of the
‘Set Upper’ or ‘Set Lower’ button
will allow you to adjust the tem-
perature in 1° increments within
the aforementioned range.
• You may view your ‘set’ tem-
perature at any time by briefly
depressing either the ‘Set Upper’
or ‘Set Lower’ button. The
set
temperature will flash in the dis-
play area for 5 seconds before
the display resumes showing the
current
cabinet temperature.
C
F
C
F
POWER
LAMPE
LIGHT
RUN
Activation
Upper chamber
CHAMBRE SUPÉRIEURE
Lower chamber
CHAMBRE INFÉRIEURE
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE
1 2
3
4
5
6
7
30
Instrucciones de Operación
Características de su
Heladera para Vinos
Especificaciones
Ancho 23,44” / 595mm Temperatura 4~18°C / 39,2~64,4°F
Alto 69,31” / 1760mm Peso Neto 247 libras
Profundidad 28,44” / 722mm
1. Puerta de vidrio templado: Polarización
para proteger contra radiación UV pero
permite ver fácilmente el interior.
2.
Luces interiores: Iluminan ambos
compartimientos del enfriador de vinos
3. Repisas de madera de cerezo con
moldura de acero.
4. Controles Electrónicos Dobles: Para
regular independientemente la temperatura
de ambos compartimientos de la heladera
para vinos.
5. Escape Frontal: Permite su instalación
empotrada.
6. Patas Niveladoras
7. Trabas con llave a prueba de niños.
8. Juntas Magnéticas de la Puerta: Las
juntas ajustadas mantienen todo el poder
de enfriamiento y los niveles de humedad.
1
2
3
4
5
7
8
6
PUISSANCE