Danby DWC408BLSST Refrigerator User Manual


 
Before You Call For Service
If none of the above rectify the situation please contact our customer care department
at 1-800-26- (1-800-263-2629)
11
Trouble Shooting
26
BIENVENIDO
¿NECESITA AYUDA?
Bienvenido a la familia
Danby. Estamos
orgullosos de nuestros
productos de alta calidad
y creemos en el servicio
confiable.
Usted lo podrá apreciar
en este manual fácil de
usar, y lo escuchará en
las voces amistosas de
nuestro departamento de
servicio al consumidor.
Tel.: 1-800-26-
Sobre todo, usted
apreciará estas ventajas
cada vez que use su
heladera para vinos. Eso
es importante, ya que su
nuevo artefacto formará
parte de su familia por
mucho tiempo.
Antes de solicitar servicio, hay
algunas cosas que puede
hacer para ayudarnos a
servirle mejor…
Lea este manual
Contiene instrucciones que lo
ayudarán a mantener
correctamente su heladera
para vinos.Si usted recibe un
artefacto dañado, llame
inmediatamente al distribuidor
(o constructor) que se lo
vendió.
Ahorre tiempo y dinero.
Lea la sección de Diagnóstico
de Problemas antes de llamar.
Esta sección le ayudará a
resolver problemas comunes
que pudieran ocurrir.
Si necesita asistencia, no se
preocupe y llámenos.
Tél.: 1-800-26-
Escriba aquí el modelo y el número de
serie. Se encuentran en una etiqueta en
la parte de atrás de la Heladera para
Vinos.
Número de Modelo DWC408BLSST
Número de Serie
Fecha de compra
Abroche su recibo en la parte de atrás
de este manual. Lo necesitará para
obtener servicio de garantía.
¡Comience Aquí! Antes de usar su Heladera para Vinos
Problem Possible Cause What to do
No Power A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
Plug not fully inserted into wall
outlet
Replace fuse or reset circuit breaker.
Unplug the wine cooler, wait a few
seconds and then plug it back in.
Make sure the 3-prong plug on the wine
cooler is fully inserted into outlet.
Cabinet Temperature
too High
Temperature setting
Door not shut properly or
opened excessively
Recently added a large
quantity of warm bottles to the
cabinet
Verify the temperature control setting.
Adjust if neccessary.
Ensure that the door is fully closed and
that the gasket is sealing against the
cabinet. Open the door only as needed
and for short periods of time.
Limit the quantity of warm bottles being
introduced to the cabinet at the same
time. Attempt to phase in the load
introduction if possible.
“Clicking” Noise Normal sound No user intervention is required as this
sound is normal during the opera-tion of
the appliance. This audible ‘clicking’
noise may be heard as the wine cooler
ends or begins a cooling cycle.
Condensation on the
cabinet and/or door
High humidity conditions in the
home
Door not shut properly or
opened excessively
The condensation will subside once
humidity conditions return to normal.
Ensure that the door is fully closed and
that the gasket is sealing against the
cabinet. Open the door only as needed
and for short periods of time.