Filter
Top Products
8
# 8
Self-tapping
sheet metal
screws
Back Section
Back Section
Front Section
Trim
Slots to choose desired spac-
ing between Cooktop Trim and
Backguard.
Fig.07 Fig.08
32”
US
CA
SPECIFICATIONS
WALL MOUNT STANDARD BACKGUARD
INSTALLATION
1. Locate and level cooktop per installation instructions.
2. After unpacking all backguard system parts, locate the Back Section 1/4” above and centered over the Trim
attached to the cooktop.* Secure Back Section to wall with the appropriate fasteners (not supplied)(fig. 07).
*After 1/4” is located, slots in back section may be used to adjust spacing between cooktop trim and
backguard for a flush fit.
3. Secure Front Section of backguard to Back Section with #8 self-tapping sheet metal screws supplied
(fig. 08).
A
8-3/4 "
30 "
12 "
12 "
A
1-5/16 "
1-5/16 "
1/4”
15/16”
15/16”
BACKGUARDS FOR COOKTOPS - BGCU MODELS
WALL MOUNT FULL BACKGUARDS
MODEL A RACK (13-5/8”) QTY. RACK (16-5/8”) QTY.
BGCU-3036 35-7/8” - 2
BGCU-3048 47-7/8” 2 1
WALL MOUNT STANDARD BACKGUARDS
MODEL A
BGCU-1236 35-7/8”
BGCU-1248 47-7/8”