Filter
Top Products
Page 10
• If the freezer compartment door is higher
than the fridge compartment door, bring
them to the same level by turning the
elevation screw on the freezer
compartment side in the reverse direction
of the arrow (as illustrated in Figure D)
using an M6 Allen wrench .
After adjusting the doors to the same level
with the aid of the elevation screws, ensure
that the doors of the refrigerator close
properly. If the doors do not close properly,
this may adversely affect the efficiency of the
refrigerator.
Door height adjustment
In case there is a problem with the alignment
of the doors in relation to one another, they
may be re-aligned vertically by following the
steps below. Ensure that the door shelves
are empty when adjusting the door height.
1. Remove the lower ventilation cover by
unscrewing its screws as shown in the
figure below. (See Figure B)
2. Using a screwdriver, loosen the three
screws on the hinges of the lower door
which you wish to lift as shown in the
figure below. (Do not remove completely)
(See Figure C)
• If the freezer compartment door is lower
than the fridge compartment door, bring
them to the same level by turning the
elevation screw on the freezer
compartment side in the direction of the
arrow (as illustrated in Figure D) using a
M6 Allen wrench .