Filter
Top Products
CONDITION ACTION NOTES AND COMMENTS
Requires routine cleaning Mild detergent solution
applied with soft sponge or
cloth. Rinse and wipe dry.
If possible use warm to hand-
hot water. A 5% addition of
ammonia is beneficial.
Finger prints Pre-treat finger marks with
alcohol or an organic
solvent. Follow
immediately with routine
cleaning
Minimize re-occurrence by
applying a wax or silicone
based household polish to the
clean dry surface
Wipe with a little baby oil
and a soft lint free cloth.
Buff to shine.
Apply whenever necessary
Stubborn stains and
discolouration
Use a little Ceran cleaning
paste. (available from Defy
Service Centres)
Rinse and dry.
Repeat several times rather
than resorting to a single
aggressive cleaning method
Grease and fat splatter. Wipe off excess with a soft
cloth or paper towel. Use a
water borne degreasing
agent (dishwashing
liquid).Follow up by
routine cleaning.
Scratches on the brushed
finish.
For slight scratches, use a
nylon pad loaded with an
iron free a
b
rasive polishing
compound. Follow the
direction of the original
texture. Follow up with
routine cleaning. For deep
scratches use a coarser
abrasive initially and
follow up as for light
scratches.
Deep scratches will be
difficult to remove
completely. Do not use steel
wool or metal scourers unless
they are made from stainless
steel.
It must be appreciated that some of the above suggested procedures will alter the
surface appearance of the treated area.
They should therefore only be applied with due consideration and care.