Defy Appliances 620 Cooktop User Manual


 
PAGE 9 OF12
Cleaning the oven
Switch off the electrical power supply before cleaning any part of the appliance.
Open the oven door and allow the oven to cool down.
For improved access, the shelf, roast pan and oven door may be removed.
Clean the oven with a damp, hot soapy cloth. Do not use a steam cleaner.
It may be necessary to soak burnt soils with a liquid cleaner to soften them before
scrubbing them with a nylon brush or scouring sponge.
Heavy soils on the bottom of the oven may require overnight soaking under a sponge
liberally sprinkled with household ammonia. The soil can then be removed the following
morning by washing normally.
Do not use metal objects or steel wool to
clean the oven.
After cleaning, fit the bottom element into
the hooks of the element guard. Failure to
observe this precaution would allow the
element to rest on and possibly damage the
oven enamel.
Oven light
The oven light is switched on by the oven thermostat and switches off when the thermostat
knob is returned to 0.
To replace a faulty light bulb, proceed as follows.
Switch off the power at the wall isolator to avoid the possibility of electric shock.
Remove the light cover by unscrewing it in an anti-clockwise direction
Unscrew the faulty bulb and fit a new 25 watt bulb rated for 300’C
Refit the light cover.
Removable oven door
The oven door may be removed to improve access to the oven for cleaning purposes.
1 Open the door fully to expose the hinges (A) on either side.
2 Flip the hinge locking levers (B) to the upright position.
3 Partialy close the oven door and lift it free of the side panel retaining slots.
4 After cleaning, re-fit the oven door in reverse order making sure that the bottom hinge
notches © locate properly onto the bottom edges of the side panel retaining slots.
SIDE OF DOOR
SIDE OF DOOR
S
I
D
E
O
F
D
O
O
R
A
C
1 2 3
B
HOOK
ELEMENT GUARD
ELEMENT