10
Deleld
Figure 2. 5-15P Connector
Refer to the amperage data list in SPECIFICATIONS,
the serial tag, your local code or the National Electrical
Code to be sure the cabinet is connected to the proper
power source. A protected circuit of the correct voltage
and amperage must be run for connection of the line
cord, or permanent connection to the cabinet.
CAUTION
The thermostat must be turned to OFF and the cabinet
disconnected from the power source whenever
performing service, maintenance functions or cleaning
the refrigerated area.
The 15-P plug shown in Figure 2 is used on the various
4400 Series models.