Filter
Top Products
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters
are removable without tools for cleaning. Mounted to the interior
ceiling, the interior fluorescent light is controlled automatically
through a switch mounted in the hinge assembly to protect against
breakage. Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct shall be mounted to the ceiling
assuring low velocity, even air movement throughout the cabinet
interior.
Doors:
Solid Sliding. Exterior and interior shall be corrosion resistant
stainless steel.
Glass Sliding. Double thermopane glass set in high impact black
plastic frame.
Doors are set in tracks for easy movement. Spring action assures
self closing. Gasket seals both ends of doors. Doors are removable
for cleaning.
Refrigeration system: All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 27˚F and 40˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficiency. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.
Specifications
Standard Features
Options &
Accessories
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front (SM)
•
Pressure relief valve is standard to prevent door
vapor lock
•
Exterior digital thermometer with high/low
temperature alarm
• Easy access “flip up” shroud
• Easy to use electronic control
• Three wire shelves per section - SA/SS standard
with chrome plated shelves and SM standard with
epoxy coated shelves
• 10’ attached cord and plug
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
•
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
• Energy savings door heater switch
• Environmentally friendly 404a refrigerant
• Fluorescent light with on/off switch (glass door
units only)
•
Two year parts & labor warranty
• Five year compressor warranty
Solid door Glass door
SSR2S-SLS SSR2S-SLG Stainless exterior and interior full sliding door
SSR2S-SLSH SSR2S-SLGH Stainless exterior and interior half sliding door
SAR2S-SLS SAR2S-SLG Stainless exterior and aluminum interior full sliding door
SAR2S-SLSH SAR2S-SLGH Stainless exterior and aluminum interior half sliding door
SMR2S-SLS SMR2S-SLG Stainless front aluminum exterior and interior full sliding door
SMR2S-SLSH SMR2S-SLGH Stainless front aluminum exterior and interior half sliding door
Models
Specication Line®
Self-Contained Sliding Door Two Section Shallow
Reach-In Refrigerator
Specication Line®: Sliding Door Two Section Shallow Reach-In Refrigerator
• Additional shelves
• Tray slides
• Stainless steel back
• Laminate on front, sides and back
• Bottom mount electrical
• Stainless steel banking strip
• Heat shield end
• Stainless steel kick plate
• Laminate kick plate
• 4” stainless steel utility base
• 220-60-1 electrical
• 230-50-1 electrical
• Security package
SSR2S-SLG