Delfield SSH-G Refrigerator User Manual


  Open as PDF
of 2
 
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, standard
shelves are chrome plated. Shelves rest on clips which are adjustable
on 1” increments on stainless steel pilasters axed to the cabinet
interior. Pilasters are removable without tools for cleaning. Mounted
to the interior ceiling, the interior uorescent light is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
edgemount, self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle is continuous
along vertical dimension of the door. Door gaskets are magnetic and
mount to the door, snapping in place and removable with out tools.
Keyed door lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped, with
tubular ns. High speed blower provides uniform airow in the cabi-
net. Entire heating system is mounted to the exterior of the cabinet
ceiling, outside the food zone. It is assembled as one piece and can
be removed as one piece. Temperature is controlled by an adjustable
electronic thermostat. System on/o switch is located on the front
exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Specifications
Standard Features
Options &
Accessories
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior
(SA)
Aluminum interior and exterior, stainless
front (SM)
Built in door locks with heavy duty strikes
Exterior digital thermometer with high/low
temperature alarm
Easy to use electronic control
Easy access “ip up” shroud
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Three chrome plated wire shelves per section
6” adjustable stainless steel legs
Stainless steel breaker strips
Stainless steel interior door liner
Two year parts & labor warranty
•
•
•
•
•
•
•
•
•
•
•
•
•
One section Two section Three section
SSH1-G SSH2-G SSH3-G Stainless exterior and interior glass full door
SSH1-GH SSH2-GH SSH3-GH Stainless exterior and interior glass half door
SAH1-G SAH2-G SAH3-G Stainless exterior and aluminum interior glass full door
SAH1-GH SAH2-GH SAH3-GH Stainless exterior and aluminum interior glass half door
SMH1-G SMH2-G SMH3-G Stainless front aluminum exterior and interior glass full door
SMH1-GH SMH2-GH SMH3-GH Stainless front aluminum exterior and interior glass half door
Models
Specication Line®
Self-Contained Glass Door Heated Reach-In
Specication Line®: Glass Door Heated Reach-In
Security (prison) package
6” polyurethane casters
Incandescent light
Door eld rehingability
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SSH1-G