DeLonghi CTJ 4003 Toaster User Manual


 
CT04R Toaster
6
BEFORE USING FOR THE FIRST TIME
Clip excess cord into the cord storage clips underneath the
toaster.
As with all new heating elements, your toaster may emit a slight
burning or ‘new’ smell when it is first switched on. This is
normal and not a cause for concern.
To eliminate the ‘new’ smell at the first use, operate the toaster
on a medium setting without any bread inside. Ensure the room
is well ventilated during this operation.
TO USE YOUR TOASTER
Make sure than the ON levers (D) are at the rest position. Move
the browning control dial (B) to the desired setting.
Connect the appliance to the electrical outlet.
Insert the slices of bread into the bread toasting slots (A) and
lower the lever (D) until it is all the way down.
Note: If the appliance is not connected to the electrical
outlet, the lever (D) will not stay down.
When the toasting is finished, the lever returns to the rest
position, raising the toasted bread slices at the same time.
If the bread is not sufficiently toasted, select a darker degree of
toasting by turning the browning control dial (B).
The toasting can be interrupted at any time by pressing the
Stop/Cancel button (F). Never lift the lever (D) to cancel
toasting.
Caution: the bread toasting slots become very hot
during operation. Do not touch.
Defrost function
Frozen slices of bread may be toasted by pressing the Defrost
button (E) immediately after lowering the lever (D); the toasting
cycle will be lengthened in order to achieve the desired browning.
The defrost indicator light will remain lit while the defrost function
is in use.
Reheat function
To warm toast that has popped up but gone cold, lower the lever
(D) again and then press the ‘Reheat’ button (G). Please note that
this is fixed reheat time which cannot be adjusted by the browning
control. The reheat function can be cancelled at any time by
pressing the Stop/Cancel button (F). The reheat indicator light will
remain lit while the reheat function is in use.