Filter
Top Products
7
CLEANING
• Always switch off, unplug and dismantle before cleaning.
• Empty the carafe before unscrewing it from the blade unit.
• Do not place any parts in the dishwasher.
• Any other servicing should be performed by an authorized service representative.
Power unit
• Wipe with a damp cloth, then dry.
• Store excess cord in the storage area at the back of the power unit (6).
Blade unit
1 Remove the blade unit from out of the carafe by turning clockwise to release.
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thor-
oughly under the tap. Don’t immerse the blade unit in water.
Other parts
Wash by hand, then dry.
TROUBLESHOOTING
Problem
The blender is plugged in but there is no
power.
The blade unit is difficult to remove.
The carafe is leaking from the bottom.
The carafe is leaking from the top.
Consistency of blending is unsatisfactory.
Cause/Solution
Make sure lid and base are both locked into
position. If they are not both in place, the unit
will not work.
Make sure hands are completely dry and turn
the blade unit clockwise. If it is still difficult to
remove, try using a silicon jar opener to help
with the grip.
The sealing ring is not in place or the blade
unit is not locked tight enough. Ensure that
the sealing ring is in tacked and the blade
unit is fully locked.
The carafe is filled beyond capacity.
The mixture may have too much ice or may
be too thick. Slowly add more liquid to the
mixture until the desired consistency is
achieved.