Filter
Top Products
UNDERSTANDING THE CONTROL PANEL:
1. CLOCK / TIMER DIGITAL DISPLAY: Displays the clock and timer settings. See
“Setting the Clock” section of this manual for programming the time.
2. PROG BUTTON: This button allows you to program the coffee maker up to 24
hours before the desired brewing time. See the section on “Brew Cycle Delay”
for details on activating the TIMER function.
3. HOUR AND MIN BUTTONS: These buttons advance the hour and minute display
for the clock and timer. See the section on “Setting the Clock”.
4. TIMER LIGHT: When illuminated, indicates that the Brew Cycle Delay (TIMER)
function is being used.
5. ON/OFF / TIMER BUTTON: Activates the ON / OFF (power) and TIMER (Brew
Cycle Delay) functions.
6. ON / OFF LIGHT: When the light is illuminated it indicates that the unit has begun
the brewing cycle.
7. AROMA BUTTON: Extracts the best flavor and aroma from your coffee by time-
releasing the water, so that coffee grounds are saturated a little at a time. So
no matter how many cups you brew, your coffee always has a perfect, full-
bodied flavor.
8. : When illuminated, indicates that the AROMA function has been activated.
KNOW YOUR COFFEE MAKER (continued)
HOW TO SET THE CLOCK (only on DC56T Series)
To set the correct time of day, first press the HOUR button until the desired hour is
reached. Then, press the MIN button until the desired minutes are reached. Use the
AM / PM indicator on the left side of the digital display when setting the time. NOTE:
Unplugging the unit will reset the clock to 12:00.
FIGURE 3: DC56T Series Control Panel
AROMA Light
PROG Button
TIMER LightAROMA Button
MIN Button
HOUR Button
ON/OFF Light
-7-
ON/OFF /
TIMER Button