DeLonghi DCG600 Coffee Grinder User Manual


 
introduction
Thank you for choosing De’Longhi!
For more than a century, De’Longhi has been renowned
worldwide for innovative, stylish Italian design. Each of our
products is created with careful attention to every detail.
So our products not only look beautiful, but work
beautifully in your life as well. At De’Longhi, we always
have you in mind. Thoughtful design. It’s our philosophy.
Get to know us better…visit us at www.delonghi.com for
our full line of products.
before first use
Place the box on a large, sturdy flat surface. Carefully
unpack your coffee grinder and remove all packaging
material and literature. Remove any labels or stickers
from the coffee grinder. To remove any dust that may
have accumulated during packaging, you may wipe the
unit with a clean, damp cloth. Dry thoroughly. Do not
immerse the coffee grinder in water or other liquid.
Clean the bean container and ground coffee container
with warm water and mild detergent. Rinse and dry
thoroughly. Do not use harsh or abrasive cleaners. (See
“Cleaning Your Coffee Grinder” section of this manual
for detailed instructions.) Keep all plastic bags away
from children.
machine description
cover
coffee bean container
grind settings
settings indicator
indicator lights for number of coffee cups selected
power on button
button to decrease number of cup settings
Start/Stop button
button to increase number of cup settings
bean container safety interlock
coffee outlet
power unit
cord storage
cleaning brush
safety interlock for ground coffee container
ground coffee container
ground coffee container lid
operating your coffee grinder
Place the coffee grinder on a flat, level surface away
from any edge.
1 Unwind the required length of cord from the appliance
and plug the unit into a 120V / 60Hz only outlet.
2 Remove the lid from the appliance and pour the coffee
beans into the container. Replace the lid and make sure
that it fits tightly to the coffee grinder
3 Place the ground coffee container and its lid in place.
4 Select the grind setting. As a guide use a fine setting
for espresso, a medium setting for drip coffee
machines and a coarse setting for percolators. Turn the
coffee bean container clockwise to select a finer setting
and counter-clockwise to select a coarser setting. The
settings indicator on the body of the coffee grinder
should align with the desired grind setting marked on
the coffee bean container.
5 Select the desired number of cups of coffee that is
required. This should be used as a guide only, as it will
vary depending upon taste, type and roast of the bean
and the grind selected.
Whenever the appliance is switched on with the ground
coffee container in position, the light for 2 cups of
coffee will illuminate. To select more cups, press the +
button. Each time the button is pressed, coffee for an
additional cup is selected. To reduce the number,
press the – button. When one light illuminates, coffee
for the corresponding number of cups indicated will be
milled. If two lights illuminate for example below 4 and
6 then this indicates coffee for 5 cups will be ground.
6 Once the desired number of cups has been selected,
press the ‘Start/Stop’ button.
IMPORTANT
The appliance is fitted with safety interlocks
which prevent the appliance from operating if
the ground coffee container and its lid are
not correctly fitted or if the coffee bean
container is unscrewed.
7Ground coffee will dispense into the ground coffee
container and as soon as the selected amount of
coffee has been ground, the unit will automatically
switch off. To stop the unit earlier, press the ‘Start/Stop’
button.
8Remove the ground coffee container and its lid. Use
the ground coffee as required.
3