Filter
Top Products
24
10" 1/16
(255.5 mm)
=
=
20" 5/8
(524 mm)
19" 7/8
(505 mm)
maximum
maximum
1" 3/8
(34.5 mm)
minimum
7" 7/8
(200 mm)
=
=
23"
(584.2 mm)
minimum
cut-out depth
minimum height
from the floor
22" 5/8
(574.4 mm)
cut-out height
38"
(965.5 mm)
cut-out width
22"
(559 mm)
Fig. 6.3
Fig. 6.4
ᕦ
Provide a hole for
gas connection to
1/2" diameter
pipe fitting.
Provide hole
for electrical
connection in
this area
Area for
electrical
connection
Gas line opening:
Provide a suitable hole on the bottom of
cutout. The centre of hole shall be 10" 1/16
(255.5 mm) from the centre of cutout to the
left side and 20" 5/8 (524 mm) from the
front corner of cutout to the back.
Grounded outlet:
The electric cord with 3-prong ground plug
has a length of 48” (1220 mm). Grounded
outlet should be located in an area 7" 7/8
(200 mm) below the bottom of cutout and
only on the right side of the cabinet (from
the centre to the right side of the cabinet).
A suitable hole has to be provided on the
bottom of the cutout, in an area positioned
on the right rear corner (1" 3/8 [34.5 mm]
maximum from the right side of cutout and
from the rear corner to maximum 19" 7/8
(505 mm) from the front corner of cutout),
to pass the appliance cable.