Using Your Dishwasher Installation
Page 9
CONTROL PANEL
2
3
1 4
5 6
9
4
3
2
1
Power button: To turn on/off the power supply.
Option function indicator:
Extra Drying Express Strong Wash
Option button: Press the button to select option
functions in the following direction.
Extra Drying, Express, Strong Wash
Extra drying - An increased temperature during
the final rinse to increase drying well. There is a
slight increase in the energy consumption.
(This function can only be used with
programmes Intensive, Heavy, Normal, Glass
and 1 Hour).
Express - This function can reduce the running
time, water and energy consumption are slight
increased.
(This function can only be used with
programmes Intensive, Heavy, Normal and
Glass ).
Strong Wash - This function can wash very
soiled pots and pans. The temperature and
water is increased during the washing cycle.
(This function can only be used with
programmes Intensive, Heavy, Normal, Glass
and 1 Hour ).
Language Button: Press the button to select
the appropriate language. English, French,
German, Russian, Italian, Dutch
6
5
Delay Button: Press to delay the wash.
Alt Button: Dual zone wash function, press the
button to select either upper basket or lower
basket loaded and the response indicators will
light up.
Page 20
7 8
8
Start /Pause button: To start the selected
washing program or pause the washing
program when the machine is working.
Display screen: to show the remaining
time and the state(running state, delay
time,error codes etc )
9
Attention:
Child lock function: press two buttons( + )
simultaneously to lock the program.
Program indicators:
Rinse Aid indicator:
Indicates when the dispenser needs to be refilled.
Child lock indicator:
Delay function indicator:
Language indicator:
Delay time ,Remain time ,or error codes indicator:
Alt functions indicator:
7
Program button: Press the button to select
appropriate program.
Drain Hose Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be at a height less than
1000mm. The free end of the hose must not be
immersed in water to avoid back flow.
Syphon Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be less than 1000mm.
How to Drain Excess Water from Hoses
If the sink is more than 100cm higher than the floor,
Ÿ
the excess water in the hose cannot be drained
directly into the sink. It will be necessary to drain
excess water from the hose into a bowl or suitable
container that is held outside and lower than the
sink.
MAX 1000mm
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
¦40mm
B
Water Outlet
Connect the water drain hose. The drain hose must
Ÿ
be correctly fitted to avoid water leaks. Ensure that
the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to
Ÿ
use a similar drain hose.
It must be no longer than 4 metres; otherwise the
Ÿ
cleaning effect of the dishwasher could be
reduced.