DeLonghi DL 48 P6E Range User Manual


 
15
USING THE OVENS FOR THE FIRST TIME
- Put in the shelf and the tray.
- Switch the oven on empty (on a cooking function NOT SELF CLEANING) at maximum
power for about 2 hours to remove traces of grease and smells from the components.
- When the oven has cooled down and unplugging the range, clean the inside of the oven
with a cloth soaked in water and neutral detergent and dry it perfectly.
WARNING:
The door is hot during operation, use the handle.
Attention: the oven door becomes
very hot during operation.
Keep children away.
VERY IMPORTANT
The oven shall be used always
with the door closed.
NEVER USE THE RANGE WHEN
ONE OVEN IS OPERATING IN
SELF CLEANING MODE.
NEVER OPERATE BOTH OVENS
OF THE RANGE IN SELF CLEAN-
ING MODE AT THE SAME TIME.
ALWAYS OPERATE OVENS IN
SELF-CLEANING MODE ONE AT A
TIME.
WHEN THE SELF CLEANING
MODE HAS BEEN COMPLETED:
• do not operates immediately the
other oven of the range in self
cleaning mode: LET THE RANGE
TO COOL DOWN.
• do not start immediately a new
self cleaning cycle on the same
oven: LET THE RANGE TO COOL
DOWN.
OPERATING PRINCIPLES
Heating and cooking in the multifunction self cleaning oven takes place as follows:
by normal convection
The heat is produced by the upper and lower heating elements.
by forced convection
The heat produced by the circular element is distributed throughout the oven by the
fan.
by radiation
The heat is radiated by the infra red broil element.
by radiation and fan
The radiated heat from the infra red broil element is distributed throughout the oven
by the fan.
by double radiation and fan
The fan distributes the heat radiated by the broil heating element and the upper heat-
ing element in the oven.
by ventilation
The food is defrosted by using the fan only function without heat.
by self cleaning
The heat produced by the heating elements cleans the internal oven cavity removing
all residue of grease.
THIS IS NOT A COOKING FUNCTION
GENERAL FEATURES
The ovens have special operating features.
Five different functions can be used to satisfy all cooking needs; it also has a self clean-
ing function which can clean the oven cavity at high temperature, a defrost function and
an oven light function.
These functions are managed by an electronic programmer which keeps the tempera-
ture set constant by means of a probe inside the oven cavity.
The ovens have the following heating elements:
- Lower heating element (double) 500+ 1300 W
- Upper heating element 1000 W
- Grill heating element 2000 W
- Circular heating element 2200 W
how to use the self cleaning ovens
¿
NOTES ON OVEN WORKING
A cooling fan starts automatically when selecting a cooking or self cleaning mode.
It stops when turning the selector knob to OFF or light or defrosting position and
the inside oven cavity temperature drops below 100 °C (212 °F).
The purpose of this fan is to reduce the temperature inside/outside the appliance.
Note: The first time the oven is used or after a black-out the programmer must be start-
ed by pressing keys 2 and 3 simultaneously. See the chapter How to use the electron-
ic programmer.
2
3
IIIIII
I
I
I
I
I
I
IIIIIIIIII
I
I
I
I
I
I
IIII
IMPORTANT:
DURING THE SELF-CLEANING
CYCLE THE WARMING DRAW-
ERS DO NOT OPERATE.
If during self-cleaning cycle the
warming drawer control knob has
been turned ON return the knob to
the OFF position. Otherwise at
the end of the self-cleaning cycle
and after having turned the oven
selector control knob to the OFF
position, the warming drawer will
operates.