Filter
Top Products
Coffee Maker
8
Cleaning and maintenance
Before performing any cleaning or maintenance operations,turn the
machine off, unplug it from the power socket and allow it to cool
down.
Cleaning the filter holder
About every 200 coffees, clean the filter holder of ground coffee as
follows:
• Remove the filter with crema enhancer
• Clean the inside of the filter holder.Never wash in a dishwasher.
• Remove the crema enhancer cup (fig. 23) by unscrewing in the
direction indicated by the arrow on the cap.
• Remove the crema enhancer from the container by pushing it
from the cap end (fig. 24).
• Remove the gasket (fig. 25).
• Rinse all components and clean the metal filter thoroughly in hot
water using a brush (fig. 26). Make sure the holes in the metal fil-
ter are not blocked. If necessary, clean with a pin (see fig. 27) or,
preferably, by burning the particles obstructing the holes over a
flame (TAKE CARE TO AVOID BURNS).
• Replace the filter and gasket on the plastic disk as shown in fig.28.
Make sure to insert the pin on the plastic disk into the hole in the
gasket indicated by the arrow in fig.28.
• Replace the assembly in the steel filter container (fig. 29), making
sure the pin is inserted in the hole in the support (see arrow in
fig. 29).
• Finally, screw on the cap.
Failure to clean as described above invalidates the guarantee.
Cleaning the boiler outlet
About every 200 coffees,the espresso boiler outlet must be cleaned
as follows:
• Make sure the appliance is not hot and that it is unplugged from
the mains;
• Using a screwdriver, unscrew the screw fixing the espresso boiler
outlet (fig. 30);
• Clean the boiler with a damp cloth;
• Clean the outlet thoroughly in hot water using a brush.Make sure
the holes are not blocked.If necessary,clean with a pin (fig.27).
• Rinse under running water, rubbing all the time.
fig.23
fig.24
fig.25
fig.26
fig.27 fig.28 fig.29