Filter
Top Products
8:00
AM
AUTO
fig. 8
fig. 9
fig. 10
fig. 11
Filter Coffee Maker
7
• The coffee will start to come out after a few seconds. It is
completely normal for the appliance to release a little
steam while the coffee is filtering.
• Models with glass jug: If you leave the ON/OFF button pressed
after percolation has finished, the plate will keep the coffee at the
ideal temperature. The unit automatically shuts off after two
hours.
• Models with thermal jug: To p our the coffee, turn the lid to
the position shown in (fig. 9). To completely remove the lid
from the jug, turn it to the position shown in (fig. 10).
The appliance switches automatically off after brewing cycle.
Attention: Removing the jug before all the coffee is made does
not interrupt production of the coffee, but merely blocks flow
into the jug. If you want to pour out a little coffee
immediately, you are recommended to do so as rapidly as
possible in order to avoid the coffee overflowing in the filter
holder.
Programming the automatic start (models with electronic
control panel only)
Make sure that the time is set correctly.
To program the time to start coffee preparation:
• Press the SET TIMER button and keep it pressed until you reach
the desired switch-on time.
•Then release the SET TIMER button. The time will flash for a few
seconds until set: then the display will show the current hour.
Activating the timer
After you have:
- Set the time for switch-on as described in the previous section;
- Prepare the machine for making coffee. Press the
ON/AUTO/OFF button twice (fig. 11). The ON/AUTO
indicator light changes to green indicating the coffee m
aker is
in operation: the display shows AUTO.
Cleaning and maintenance
Before performing any cleaning or maintenance operations turn
the machine off, unplug it from the power socket and allow it to
cool down.
1. When cleaning the coffee maker, do not use solvents or
abrasive detergents. A soft, damp cloth is sufficient.
2. Never immerse the coffee maker in water: it is an electrical
appliance.