Filter
Top Products
Min. 31 in
2
(200 in
2
)
If you are considering integrating a Dometic
refreshment center into the furniture, don’t forget that
the cooling unit needs fresh air! These sketches show
various ways to integrate and ventilate a unit.The
open cross-section for fresh air supply and extracted
air must be at least 31 square inches (200 cm
2
), and
the air flow around the cooling unit should be
unrestricted. If you have any questions, Dometic’s
experts will be happy to answer them.
■ Ventilation
11
■ Sufficient ventilation can be accomplished
even in taller furniture. For proper cooling, the
air needs to flow freely around the cooling unit
and exit freely at the top.
■ The opening for supply air can also be built
into the furniture base, but the footprint must
not prevent the air from passing the cooling
unit freely.
■ Should you want to place the unit on the
floor panel of your furniture, be sure to use the
optional 1-5/8” (42 mm) feet.These and an air
grille integrated in the furniture door ensure
sufficient ventilation. Both doors can be
connected with a slide hinge which
compensates for the different pivot points.