Filter
Top Products
80 SERIES COOLING UNITS
23
80 SERIES EVAPORATORS
Application: Horizontal, Layout: CU-84
Square Layout: CU-85
Vertical Layout or Wall Mount: CU-86
Voltage: 12/24 volts DC
Cooling Volumes: Up to 8.8 cubic feet max. for normal
refrigeration or 2.5 cubic feet for
deep-freezing applications
Refrigerant: Environmentally-safe R134a
Dimensions: CU-84: 5.1"D x 15.2"W x 6.1"H
(129mm x 386mm x 155mm)
CU-85: 8.7"D x 8.7"W x 6.1"H
(220mm x 220mm x 155mm)
CU-86: 7.6"D x 8.7"W x 9"H
(193mm x 220mm x 228mm)
Net Weight: CU-84: 13.2 lbs. / 5.98 kg.
CU-85: 13.2 lbs. / 5.98 kg.
CU-86: 14.3 lbs. / 6.4 kg.
Application: L evaporator for medium
refrigerator: VD-04
Cooling Capacity: 4.5 cubic feet (127 liters)
Dimensions: 14.8"W x 10"H x 3.9"D
(375mm x 254mm x 99mm)
Net Weight: 3.3 lbs. / 1.49 kg.
Application: Plate evaporator for
medium refrigerator: VD-05
Cooling Capacity: 4.5 cubic feet (127 liters)
Dimensions: 14.8"W x 13.7"H x 1"D
(375mm x 348mm x 25.4mm)
Net Weight: 3.3 lbs. / 1.49 kg.
Application: Angle evaporator for
medium refrigerator: VD-08
Cooling Capacity: 5.6 cubic feet (158 liters)
Dimensions: 13.4"W x 17.7"H x 10.6"D
(340mm x 449mm x 269mm)
Net Weight: 4.4 lbs. / 1.99 kg.
Application: O evaporator for medium
refrigerator: VD-09
Cooling Capacity: 5.6 cubic feet (158 liters)
Dimensions: 14.4"W x 5.5"H x 10.6"D
(365mm x 139mm x 269mm)
Net Weight: 4.4 lbs. / 1.99 kg.
Application: Plate evaporator for
medium refrigerator: VD-18
Cooling Capacity: 4.5 cubic feet (127 liters)
Dimensions: 9.8"W x 13.7"H x 1"D
(248mm x 347mm x 25.4mm)
Net Weight: 3.1 lbs. / 1.4 kg.
Application: Circulating air evaporator for
medium refrigerator: VD-15
Cooling Capacity: 7 cubic feet (198 liters)
Dimensions: 8.6"W x 10.8"H x 2.6"D
(218mm x 274mm x 66mm)
Net Weight: 4.4 lbs. / 1.99 kg.
CS-NC-15 COOLING KIT
Application: Vertical Layout or Wall Mount:
CS-NC-15
Voltage: 12/24 volts DC
Cooling Volumes: Up to 8.8 cubic feet max. for
normal refrigeration or 2.5
cubic feet for deep-freezing
applications
Refrigerant: Environmentally-safe R134a
Dimensions: 9"D x 10"W x 14"H
(228mm x 254mm x 355mm)
Net Weight: 14 lbs. / 6.35 kg.
From Passive Cooler to Active
Compressor Refrigerator
z
Ideal for converting an existing,
passive, insulated cooling area
into a full, compressor-powered refrigerator.
z
Cut an opening in the side of the coolbox and push
the unit into the adjoining section. Fasten it from the
inside to the evaporator housing using the pre-cut
assembly holes.
z
Integrated rubber seal ensures that the coolbox is
securely sealed. Coolant lines are fully assembled
and connected at the factory.
www.DometicEnviro.com