Filter
Top Products
3
Installation
❖❖
❖❖
❖
English
Warnings
This section of the manual refers to essential safety Installation information for all
compressor-type refrigerators and freezers (including Portable and Special
Purpose Units), provided by Dometic Corporation.
1. When replacing old appliances, before disposing of the old model, any locking device
with hinging must be removed so that the door cannot be accidentally locked. All
refrigerant must be removed according to current EPA regulations.
2. Unpacking and installation of the unit must be carried out with the utmost care. To
avoid accidental injury use protective gloves, in particular for the models with a remote
condensing unit.
3. After unpacking the appliance ensure that it is not damaged in any way. Notification
of damage must be supplied to the dealer no later than 24 hours from the purchase
date. The appliance must be used exclusively for the conservation of food and drinks.
4. Install the appliance away from any heat sources and allow for sufficient ventila-
tion. (See Installation Section)
5. After installation, wait at least one hour before switching on the appliance. This precau-
tion protects the compressor from shipping mishaps and ensures optimum refrigeration
efficiency.
6. Before connecting the appliance to the power supply, check that the line voltage
corresponds to specifications stated on the appliance dataplate and the compressor.
7. Ensure the safety of operation by proper grounding of the electrical system.
8. After installation, check that the appliance is not standing on the power supply cable.
For any installation problems call your dealer, or call Dometic Corporation at 804-746-1313
or 954-973-2477. Ask for the Tundra service department.
Refrigerators & Freezers • Installation