Filter
Top Products
CERTIFIED INSTALLATION
Certified installations require one roof vent and one lower side
vent or as optional one upper vent and one lower side vent.
The two alternatives are provided for by using the different kits
listed in the Appendix.
For further information contact your dealer or distributor.
METHODS OF INSTALLATION
The methods of installation are shown in figures 10 a and 10 b.
It is essential that all maxlmum or minimum dimensions are
strictly maintained as the performance of the refrigerator is
dependent on an adequate flow of air over the rear of the
refrigerator.
VENTILATION -HEIGHTS
Minimum ventilation heights in inches and mm
RM2300 in.
37 31
RM2400
in. 34
RM2500
in.
42
RM2600
in.
56
RM2800
in.
62
Fig. 10
a
Condenser
Ventilation
Duct cross
section
area 5"x18"
Condenser
Fig. 10 b
7