Dometic RMD 8501 Refrigerator User Manual


 
Fig. 26
14
Fig. 25
Insert winter cover.
5
The exhaust gas duct system must be made in
such a manner as to achieve a complete extrac-
tion of combustion products to the outside of
living space. The flue gas is vented directly
through the upper grille. Do not use any kind of
aluminium flue pipe to lead the flue gas out.
The T-piece (Fig. 26) must be trented towards
the outer wall.
An installation other than described will
reduce the cooling capacity and jeopardise
the manufacturer's warranty/product liabi-
lity.
CAUTION!
Installation
Fig. 21
Seal the mounting frame
making it waterproof
(
does not apply for
mounting frames with
integral seal).
1
Fig. 22
Insert frame and screw
into position.
2
Fig. 23
Insert ventilation grille.
3
Fig. 24
Lock ventilation grille.
4
4.3.3 Installing L205 (without mosquito
net)
To install the ventilation grille, cut a rectangle
width 451 mm x height 156 mm, in the outer
wall of the vehicle (for position of the cuts, see
Fig. 11,12).
4.3 Exhaust duct system