Filter
Top Products
KNOWING YOUR BLENDER
• Never remove the jug from the
power base until motor and blades
are stationary. Damage to the
clutch can occur
• Do not leave the blades in water
and never leave the blender
jug with any liquid inside it
• Keep jug empty when not in use
• Do not add boiling liquids or
foods to glass jug. Always
cool liquids or food items to
below 60°c before adding
• Frozen foods with the exception of
small pieces of fruit or ice cubes
should not be placed in the jug
• Do not insert frozen items into jug
taken directly from a hot
dishwasher
• Do not immerse or wash jug in
boiling or very hot water
SAVE THESE
INSTRUCTIONS
5
• Use this product with rated
voltage A.C. outlet only
• Be sure to unplug the A.C. cord
when blender is not being used
• Do not plug the appliance in
before checking that the voltage
indicated on the rating plate is the
same as the electrical supply
voltage
• If the power cord is damaged it
must, for safety reasons, be
replaced by Dualit or an
authorised Dualit repairer
• If blender fails to operate refit lid
ensuring correct positioning of the
plunger into the Safety Interlock
System and/or unplug for 15
minutes, plug in and try again
• Ensure the blade assembly is cor
rectly fitted
If problems persist, either contact the
shop where you purchased from, or
contact Dualit customer services.
This appliance is provided with a
safety system which disables the
mechanism if the jug lid or blade
assembly is not fitted even if the
switch button is ON.
NNoottee::
Do not use the jug to switch the
appliance on and off.
Only use with the glass jar and lid
firmly in place, ensure the lid and
plunger are correctly positioned into
the Safety Interlock System, page 7.
A small micro switch detects if the
blade assembly is locked into the
collar and is located in the correct
position. If the jug and blade unit are
not correctly assembled the motor
will not start.
ALWAYS PLACE ONE HAND ON
TOP OF THE LID WHEN THE
MOTOR IS RUNNING. ENSURE
SAFETY INTERLOCK IS FIRMLY
ENGAGED
BEFORE PLUGGING IN
SAFEGUARDS
SAFETY INTERLOCK SYSTEM
2007.9.18_DBL3_ blender manual.qxp 18/09/2007 11:44 Page 5