Filter
Top Products
76
KNOW YOUR JUICER
PLUNGER
JUICE
CONTAINER
WITH FROTH
FILTER/LID
CONTROLS
WORK BOWL
PULP
CONTAINER
LID WITH FEED TUBE
All illustrations are for representation only,
LOCKING ARM
STAINLESS STEEL
MICRO MESH FILTER
PREPARING TO JUICE
Wash the fruit/vegetables.
Cut into conveniently sized
pieces for inserting into the
feed tube. Stones,peel and
pips must be removed.
Attach the mesh filter
basket by pushing it down
on to the coupling of the
main body until it clicks into
place.
Insert the spout of the work
bowl through the hole on
the main body,then place
the work bowl on the main
body and pulp container.
Raise the safety locking arm
up and lock into the two
grooves on either side of
the juicer lid. It will click and
lock into place.
Align and place the lid on
top of work bowl and pulp
container.
Attach the pulp container to
the rear of the main body
and align and position in
place.
1
2
5
3
4
6
WASH & CUT
WORK BOWL
THE LID
THE FILTER
PULP CONTAINER
LOCKING ARM
MAIN BODY
CLEANING
BRUSH
PLACE THE MAIN BODY ON A FLAT, DRY SURFACE. ENSURE ALL
STONES,PEEL AND PIPS ARE REMOVED BEFORE JUICING.
juicer ib_140809.qxp 19/02/2010 15:16 Page 6