Filter
Top Products
5
SETTING UP
NOTE: THE GRINDER WILL NOT OPERATE WITHOUT THE HOPPER OR
GROUND CONTAINER CORRECTLY IN POSITION.
Clean and dry ground
container before using. Slide
the coffee container in. Place
the grinder on a level
surface.
Unreel the required length
of cord. It is important to
keep the cord short. Pack
the excess cord length in the
cord tidy, then plug-in.
Place the hopper with lid on
the main body, align the
arrow on the main body to
the arrow on the hopper
and rotate the hopper
clockwise so the arrow is
above the grind control.
2
1
3
CORD TIDY
1
COURSENESS SETTING
Adjust the degree of grinding by twisting the hopper and
aligning the arrow on the hopper with the desired setting.
= Fine grinding (e.g. for espresso coffee machine)
= Medium grinding (e.g. for filter coffee machines)
= Course grinding (e.g. for coffee percolator)
2
ADD BEANS
Add your beans in to the
hopper. Check no foreign
objects are in the hopper
before grinding. Remember
only grind what you need.
Replace the lid.
GRIND CONTROL
Fill with beans after setting the courseness control. The grinding control must not be
operated when the motor is running.
4
KNOW YOUR
COFFEE GRINDER
REMOVABLE
UPPER BURR
250G HOPPER & LID
LOWER BURR
Rotates at slow speed to preserve
flavour and aroma of the coffee
GRIND
Main ‘On’ and
manual ‘Off’ button
GROUND
CONTAINER
& LID
DOSING
CONTROL
NON SLIP FEET
For quick and easy cleaning
THE HOPPER
THE GROUND
CONTAINER
IB-CCG2-A - 23.03.11_Layout 1 31/03/2011 13:02 Page 4