Dualit the Percolator Coffeemaker User Manual


 
Do not allow water to stand in the
percolator overnight.
Use filtered water instead of ordinary
tap water.
Descale the percolator regularly
using a proprietary brand of
descaler suitable for use in plastic
bodied products (even in metal
percolator there are plastic parts).
In areas of very hard water
descaling may be necessary as
often as once a month.
When descaling, follow the
instructions on the package
of descaler. When descaling
has finished, empty the percolator
and rinse it out several times with
fresh water, then fill with fresh water,
boil and discard the water, This
should ensure that no chemical
residues are left in the percolator.
5 AFTER SALES SERVICE
If the percolator is not working
correctly, check that:
You have followed the instructions
correctly.
The plug fuse has not blown.
GUARANTEE AND
I NSTRUCTIONS
FOR D UALIT
P ERCOLATOR
DUALIT LIMITED COUNTY OAK WAY CRAWLEY WEST SUSSEX RH11 7ST
TELEPHONE: +44
(0) 1293 652 500
FACSIMILE: +44 (0) 01293 652 555
EMAIL: info
@
dualit.com WEB: www.dualit.com
The main supply fuse/circuit
breaker has not blown/tripped.
If the powercord is damaged it must
be replaced by a special cord set
available from Dualit or an
authorised Dualit service agent.
This part should only be refitted by
a competent electrician.
If it still does not work, telephone
the Dualit Customer Helpline on
+ 44 (0) 1293 652 500 or the shop
where you bought it.
In the USA call Dualit Helpline:
973.623.9370
6 GUARANTEE
Any defect affecting the functionality
of the appliance which becomes
apparent within one year of its
purchase will be corrected by free
repair or replacement provided
that it has been used and
maintained in accordance with the
instructions and has not been
abused or misused in any way.
This warranty does not cover any
consequential damages.
Your statutory rights are not affected.
Safeguards
1
Before Use
2
Cleaning The Percolator
3
5
How To Use
4
6
Guarantee
After Sales Service
Wash the lid, coffee basket,
cover and percolator tube in hot
soapy water, rinse in clean cold
water, and dry thoroughly.
Rinse the inside of the percolator
with clean cold water and dry
thoroughly.
Wipe the power base and the outer
casing of the percolator with a soft,
damp cloth.
If necessary, you may use a little
household detergent. Do not let the
detergent get inside the percolator.
Assemble the percolator and store
it away.
Do not immerse the percolator or
the power base in water.
Do not use harsh or abrasive
cleaners or solvents.
Descaling
Scale build-up will cause the element
to overheat, reducing its working life.
It may also cause the safety cut-out to
operate prematurely, switching the
percolator off before the water boils.
To minimise scale build-up:
Empty the percolator after each use.
WARNING: IF THE PERCOLATOR
HAS JUST BEEN USED THE
CONTENTS WILL BE HOT. TAKE
CARE AS THE LID IS OPENED.
Boil Dry
Do not switch the percolator on
unless it contains at least one cup
of water. Misuse of this kind will
shorten the life of the percolator.
If the percolator is accidentally
switched on when it does not
contain sufficient water, a boil-dry
device will automatically switch it
off. Wait until the percolator has
cooled down before refilling.
The lid may be hot and the water
may spit as it touches the
percolator base.
4 CLEANING THE
PERCOLATOR
Unplug the power base from the
power socket.
Pour away any remaining liquid
and allow the percolator to cool
down fully.
Remove the lid, coffee basket,
cover and percolator tube.
Dispose of the used
coffee grounds.
CE Compliant to
89/336/EEC (EMC directive) and
73/23 & 93/68/ EEC (LV directive)