2
loaded than when empty.
In order to prevent vibration and noise, the freezer
should be leveled by adjusting the front leveling
legs.
Please note that this appliance is designed for
“free-standing” use only. Choose a well ventilated
location with at least 2-3 inches of clearance
around the appliance.
Locate the appliance out of direct sunlight and
away from heat sources such as an oven or boiler.
For your safety, please read the following
nformation
i
Warning: This appliance must be installed on a
circuit that is grounded.
Operation
Before plugging in your freezer for the first time
remove all packaging, clean the freezer with a soft
rag and a mixture of lukewarm water and baking
soda (2 tablespoons baking soda in 1 quart of water
orks well) . Wipe dry with soft cloth.
w
Temperature Control
The temperature in the appliance is controlled by
the thermostat control knob located in the lower
section. Turn the thermostat control knob to
regulate the temperature inside the unit. The knob
has markings to indicate the relative temperature
settings, but in general, turning the knob