Electrolux 154671201 Dishwasher User Manual


 
8
Operating Instructions
STATUS WINDOW
NOT AVAILABLE ON ALL MODELS
The STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher. The window will not display anything
when the door is closed. The STATUS window
indicates the following activity:
1-24 Indicates number of delay start hours for
selected cycle.
CL Flashes once the program has been
entered and the START/CANCEL pad is
pressed. It also flashes if the door is
opened during a wash cycle. Close the
dishwasher door to begin or continue a
wash cycle.
hd Flashes to indicate a water heat delay.
PF Appears in window when dishwasher is
first installed, or when power has been
interrupted. HI-TEMP WASH, SANITIZE
and START/CANCEL backlighting will also
flash. To clear, touch START/CANCEL
pad.
NOTE
Opening the door during normal operation will
only pause the selected cycle.
Start/Cancel
To start a cycle, press the START/CANCEL pad
once and close the door. To cancel when a cycle is
running, open the door and press the START/
CANCEL pad once. Close the door again and the
dishwasher will drain and shut off.
Error Indications
In certain situations which are critical to the ma-
chine function and safe operation, the control shall
shut down and indicate an error code ‘Er’. On units
without a display, all indicator lights will flash.
If one of these codes are displayed contact the
Electrolux Customer Care Center at 1-800-944-
9044. They will be able to provide assistance in
troubleshooting the problem and/or locating an
authorized service technician, if needed.