Electrolux air-o-chill
Blast Chiller/Freezers 100kg 20GN1/1
Internet: http://www.electrolux.com/foodservice
HDBB0302010-05-10Võib muutuda ilma etteteatamata
VESIJAHUTUSE SEADE KIIRKÜLMIKULE 100KG 880035
ÕHKJAHUT. SEADE JAHUTI+K/KÜLMIK 100KG 880031
ÕHK/VESIJAH.SEADE 90KG KJ+KK LW 100KG 880059
LW+CW KIIRJAH.KIIRKÜLMIKU HACCP LIIDES 880183
KÜPSETUSTOGI 16(400X600) 80MM 20X1/1 LW 922068
KOLME SONDI KOMPL.KIIRJAH.KIIRKÜLMIKULE 880269
KAETUD VÕRGU RIIULITUGI 881061
JAHUTI JA K/KÜLMIKU 2 SENSORSONDI 880096
JAHUTI JA K/KÜLMIKU 1 SENSORSOND 880089
HACCP BAASVERSIOONI PRINTER 881532
EKIS HACCP KOMPLEKT 922166
BANKETIKÄRU- 54 TALDRIKUT-74MM-20GN1/1 922016
AHJUTOGI+RATTAD 16X1/1GN, 80MM-LW 922010
AHJUTOGI 20X1/1GN, 63MM-LW 922007
1/1 GN AISI 304 RVT RESTIPAAR 921101
LISAVARUSTUS
JAHUTI JA K/KÜLMIKU 3 SENSORSONDI 1
STANDARD LISAVARUSTUS
Netokaal - kg 200
paigaldatuna-elekter 0.88
Võimsus - kW
Aurustustemperatuur - °C -30
Jahutusaine võimsus - W 5350
Jahutusaine tüüp R404a
Sulatuskordi 24h jooksul 6
Maks. mahutavus nõu kõrgus 65 mm 20
Kandikute tüüp GN 1/1
Ukse hinged Vasak pool
Välismõõtmed -mm/kõrgus 1783
sügavus/avatud ustega 895, 1422
Välismõõtmed -mm
Välismõõtmed -mm/laius 1040
Termomeetrid Digitaalne
Termostaat Elektrooniline
Kontrolli tüüp Elektrooniline
Jahutusseade Eraldiseisev
UK standrad 100, 85
Tootlikkus tsüklis - kg.
Jõudlus tsüklis - kg/NF. regulatsiooni alusel 72, 72
Tüüp H - KÜLMUTID - 100 KG - GN 1/1
TEHNILISED ANDMED
AOFPS201CR
726292
PERFORMANCE
• Blast Chilling cycle: 100 kg from
+90°C up to + 3°C in less than 90
minutes.
• Blast Freezing cycle : 85 kg from
90ºC up to -18 ºC in less than four
hours.
• Chilling and freezing times can vary
according to food quantity, density,
moisture contents and type of
containers. Chilling capacity
according to NF regulations is 72 kg.
CONSTRUCTION
• Automatic heated door frame.
• Internal and external finishing in 304
AISI stainless steel and back panel in
stainless steel.
• High density polyurethane
insulation, 60 mm tickness, HCFC
free.
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• All motors and fan waterproof
protected IP20.
• Evaporator with anti rust protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Hot gas defrosting system.
• Solenoid valves.
• 1 thermostatic expansion valve.
• Feet 200 mm high.
• Stand alone printer as optional, built
in on request.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste can be plumbed into drain,
but can also be collected in optional
waste container.
Installation diagram:
EQ - Equipotential screw
RO - Refrigerant outlet
EH - HACCP