Filter
Top Products
14
Controls & Settings
SYSTEM-MONITORING ALARMS
The electronic control system continuously
monitors your refrigerator/freezer for temperature
consistency, doors left ajar, and power failures.
Variances from normal operating conditions are
communicated by audible tones and a set of four
status indicator lights.
Responding to Alarms (Audible Tones & Indicator Lights)
Your refrigerator’s control system can convey the following information through
audible tones and the alarm indicator lights.
Alarm
Name
Indicator
Light
Audible
Tones
Condition
How To Respond
On
(light is
off)
Alarm system is not active
while Freezer and Fresh
Food compartments are
cooling toward the current
temperature settings.
If Freezer and Fresh Food
compartments do not match your
temperature settings in three hours,
expect the control system to signal
other conditions. If cooling does not
stabilize toward your current settings,
call 1-877-435-3267 for assistance.
Steady
Green
Alarm system is active. No response required.
Door
Ajar
Flashing
Green
9
Freezer or Fresh Food
door has been open for
over five minutes.
Close door to disable and reset alarm.
High
Temp
Flashing
Amber
9
Freezer or Fresh Food
compartment has been too
warm (45
°
F or higher) for
over an hour.
Press
Alarm Reset
button to turn off
alarm. If temperatures do not improve,
call 1-877-435-3267 for assistance.
Power
Failure
Flashing
Amber
A power outage was
detected.
Press
Alarm Reset
button to turn off
alarm and again to reset. Check if the
power failure lasted long enough to
affect stored food temperatures.
NONO
NONO
NO
TETE
TETE
TE
Each time you make settings on the control panel, a
single audible tone acknowledges your input.
Alarm Reset Button
Indicator Lights