Filter
Top Products
4
Installation
Installing the Refrigerator
Drawers
NOTE
To ease appliance installation and removal, •
we recommend the cabinet rough opening
dimensions be increased by at least ¼ inch over
the dimensions given for your appliance.
If the unit is being installed into an existing •
opening that does not match the product
dimensions, the anti tip bracket will not engage
properly. Custom modifications will need to be
made.
Mounting screws provided are intended for •
mounting bracket directly to wall studs. These
screws will not work if used with sheetrock
(dry wall) or anything other than wall studs.
Longer screws will be required for those type
of applications.
WARNING
Double drawer Refrigerator Drawers are
designed to be built-in only. The appliance can
not be free-standing.
Your Electrolux refrigerator drawers may have either
the Professional or Designer handles shown below.
For ease of explanation, we will be showing only the
Designer handles in most of the illustrations in this
guide.
ATTENTION
This installation procedure is intended for use by
persons having electrical and mechanical training
and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade.
Electrolux Home Products cannot be responsible,
nor assume any liability, for injury or damage of any
kind arising from the use of this manual.
ICON Professional
ICON Designer
Your Electrolux refrigerator drawers have been
designed for built-in installation. When built-in, your
refrigerator drawers do not require additional air space
for top, sides, or rear. The front grille must NOT be
obstructed.