Filter
Top Products
19
Setting Oven Controls
See example below to set a bake to start
immediately using the default temperature.
Once START is pressed the oven will begin heating.
The oven display shows PRE-HEATING. While
PREHEATING the Convection fan may operate.
After the oven reaches set temperature, PRE-
HEATING will turn off and a beep will indicate the
oven is ready. The oven will continue to maintain
this temperature until the cooking feature is
canceled.
If your recipe requires a different baking
temperature than the auto-suggested (default)
temperature (example below shows upper oven
temperature set for 425°F/ 218°C ).
2. Press BAKE
3. Enter 425°F
4. Press START
Setting bake for upper oven
Use the bake feature to cook most food items that
require normal cooking temperatures.
Bake may be set with the following options:
• Rapid preheat
• Cook time
• Cook time with end time
• Probe
The following temperature settings apply to the
bake feature:
• Auto-suggest (default) setting: 350°F/176°C
• Min. bake setting: 170°F / 77°C
• Max. bake setting: 550°F / 288°C
Example
1. Press UPPER OVEN
Step Press
2. Press BAKE
1. Press UPPER OVEN
3. Press START
Example
Step Press
• Place food items in rack positions 2 or 5.
• When using the offset oven rack, place in rack
position 2 or 3.
• When placing multiple food items in the oven
allow 2-4” (5-10cm) of space between the food
items for proper air circulation.
• For best results when baking cakes using 2 oven
racks, place cookware on rack positions 2 & 5.
For best results
NOTE
You may press CANCEL any time when setting
the control or during the cooking process.
About baking in upper oven
To add or change any cook settings after this
feature has started:
• Wake control panel from the sleep mode if
necessary.
• Select the UPPER or LOWER oven you wish to
change. Make temperature changes using the +
or - keys. Each press of + or - will adjust the
temperature by 5° F ( or 2°C).
• If changing cooking times, select the cook time
or end time keys needed to make the changes.