Filter
Top Products
818 17 80-00/1 15
Description of the Appliance
View of the appliance
Temperature regulator and ON/OFF-switch
Butter/cheese compartments with flaps
Door storage compartment
Bottle shelf
Salad bin
Storage shelves
Rating plate
Prior to Initial Start–Up
1
Before connecting the appliance to the mains and putting it into
operation for the first time, leave the appliance to stand for 30 minutes
if was transported upright. After transport on its side, the appliance
must be left to stand for 2 hours before putting it into operation. This is
necessary to allow the refrigerant to flow back into the compressor.
Otherwise the compressor may be damaged.
0 1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Maintenance and Cleaning”).