Filter
Top Products
Operating Instructions
30
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
...Fault warnings are displayed.
• If the top or middle light in the display is flashing you can probably
rectify the fault yourself.
Once the fault has been rectified press the ON/OFF button. The wash
programme will continue. If the fault is displayed again, contact your
local AEG Service Force Centre.
• If other lights flash in the multidisplay, please contact your local AEG
Service Force Centre stating which fault indicator is flashing.
Symptom: Possible Cause Solution
The top light in the multi-
display is flashing.
There is no water
entering the dishwasher.
Tap is blocked or furred with
lime-scale.
Clean tap.
The filter (where present) in
the threaded hose fitting is
blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose
is not correctly laid.
Check hose
installation.
The middle light is flash-
ing in the multidisplay.
The sink outlet is blocked. Clean the sink outlet.
The water drain hose
is not correctly laid.
Check hose
installation.
The top and the
middle light are flashing
in the multidisplay.
The anti-flood system has
been triggered.
Close the tap and con-
tact AEG Service
Force.