Filter
Top Products
19
Selecting the dishwashing cycle (Cycle Table)
Dishwashing
cycle
Suitable
for:
Type of
soiling
Programme se-
quence
Consumption
values
1)
1)The consumption values were obtained under standardised conditions. They depend on how
full the baskets for the dishes are. Variations are therefore possible in practice.
Pre-wash
Main wash
Intermediate
Final rinse
Drying
Length (minutes)
Energy (kWh)
Water (litres)
AUTOMATIC
2)
(50°-65°)
2) When using this cycle the degree of water clouding determines the amount of soiling on the
dishes. The length of the cycle and water and energy consumption can vary greatly – de-
pending upon the load and how dirty the dishes are. Depending upon the soiling, the tem-
perature of the water will be automatically adjusted to between 50°C and 65°C.
Dinner serv-
ice and
cookware
normally soiled,
dried-on food re-
mains
• •
1
to
2x
• •
90 - 110
1,0 - 1,5
13 - 25
30 MIN
3)
(60°)
3)When using this cycle, only load the dishwasher half full.
Dishes, ex-
cluding
saucepans
just used, lightly to
normally soiled
- • - • -
30
0,8
9
INTENSIVE
CARE 70°
4)
4)During the final rinse, the temperature is increase to 68° for 10 minutes to disinfect e.g. ba-
bies’ bottles.
Dinner serv-
ice and
cookware
heavily soiled,
dried-on food re-
mains, in particular
protein and starch
• • 2x • •
120 - 130
1,8 - 2,0
23 - 25
ECO 50°
5)
5) Test cycle for Test Institutes.
Dinner serv-
ice and
cookware,
temperature-
sensitive
dishes
normally soiled • • • • •
130 - 160
0,95 - 1,05
13 - 15