Filter
Top Products
Operating Instructions
10
Adjust the Water Softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special
salt.
3
You water supplier will be able to inform you on the hardness and
hardness range of the water in your area.
0 Adjust the water softener to the setting given in the table that corre-
sponds to the hardness of the water in your area. The water softener
can be adjusted in 10 steps.
0 1. The dishwasher must be switched off.
2. Press the function and water softener buttons simultaneously and keep
them pressed
3. In addition press the ON/OFF switch.
The LED indicators for the function and water softener buttons flash.
4. Press the softener button again.
The multi-display indicates the hardness setting.
5. Pressing the water softener button increases the hardness setting by 1.
(Exception: hardness setting 0 follows hardness setting 9).
Water Hardness
in °d
1
) in ppm
2
)Range
1)(°d) German degree, measure of the hardness of water
2)(ppm) Parts Per Million
*factory setting
Adjust
to Hardness Setting
Indication on the
Multi-Display
41-50
35-40
31-34
27-30
23-26
730-900
630-720
550-620
480-540
410-470
IV
9
8
7
6
5
H 9
H 8
H 7
H 6
H 5
19-22
15-18
330-400
260-320
III
4
3*
H 4
H 3
11-14 190-250 II 2 H 2
4-10 70-180 I/II 1 H 1
under 4 under 70 I
0
no salt necessary
H 0