Filter
Top Products
When you are using the minute minder you can make the clock
show the time of day by turning the selector knob to 'manual'. The bell
symbol will stay on to remind you that the minute minder is set. At the
end of the timed period an alarm will sound and the bell symbol will go
out.
Switch off the alarm by turning the selector knob to 'clock'. Then turn
to 'manual' and the time of day will show in the display.
Note:
You can use the minute minder when an automatic sequence has been
set, as long as you remember the following point.
1 Turn the selector knob to 'Auto' as soon as you have entered the
timed period into the display.
To change the audible signal
When the right hand knob is turned anti-clockwise, a choice of three
audible signals are available. To select the choice of signal required,
rotate knob anti-clockwise and release. Repeat procedure to choose
desired signal.
Automatic control
Important: You can only use the automatic control for the main oven.
When you use the automatic controls for the first time it's probably best
to choose a time when you are at home. That way you can check to
make sure you've set everything correctly and you'll feel much more
confident when you are away from home in the future.
Setting the controls for automatic use
This is very easy. All you have to do is work through the steps below.
The clock will work out the rest for itself.
1 Is the electricity supply on?
2 Is the clock
showing the
correct time?
To adjust turn the
selector knob to
'manual' then turn to
'clock'. Turn the
setting knob in
either direction.
22
S O N A T A 5 5 L X a
The electronic time
r