Filter
Top Products
5
Fig. 2
Description of the Appliance
• The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting one charcoal filter.
• You will need an original AEG charcoal filter for this function
(Available from your local AEG Service Force Centre).
Extractor version
• In this version fumes are extracted to the outside via a hose
connected to the coupling ring. Fig. 1.
• In order to obtain the best performance the hose should have a
diameter equal to the outlet hole.
Only for model DL 4150-CHDL 4150:
Should there already be an hose of diameter 100 mm that ducts to
the outside through the walls or roof, it is possible to use the 120/
100 mm adapter. In this case the hood will be slightly noisier.
Filter Version
• The air is filtered through a charcoal filter and
returned to the kitchen. Fig. 2.
• You will need an original AEG charcoal filter for
the filtering function. (See Special Accessories).
Fig. 1
510
710
Coupling ring
Bayonet screw fitting
(Only 570 D - 5708 D)