Filter
Top Products
Operating Instructions
11
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport.
Then perform the following steps:
0 1. Adjust the water softener
2. Fill with Salt for the Water Softener
3. Fill with Rinse Aid
Adjust the Water Softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special
salt.
3
You water supplier will be able to inform you on the hardness and
hardness range of the water in your area.
0 Adjust the water softener to the setting given in the table that corre-
sponds to the hardness of the water in your area. The water softener
can be adjusted in 10 steps.
Water Hardness
in °d
1
) in ppm
2
)Range
1)(°d) German degree, measure of the hardness of water
2)(ppm) Parts Per Million
*factory setting
Adjust
to Hardness Setting
Indication on the
Multi-Display
41-50
35-40
31-34
27-30
23-26
730-900
630-720
550-620
480-540
410-470
IV
9
8
7
6
5
H 9
H 8
H 7
H 6
H 5
19-22
15-18
330-400
260-320
III
4
3*
H 4
H 3
11-14 190-250 II 2 H 2
4-10 70-180 I/II 1 H 1
under 4 under 70 I
0
no salt necessary
H 0